NEURAL NETWORK MODELING AND OPTIMISING OF THE AGGLOMERATION PROCESS OF SULPHIDE POLYMETALLIC ORES
DOI:
https://doi.org/10.37943/AITU.2021.76.49.001Keywords:
neural network technology, modeling of technological processes, optimizing the mode, agglomeration furnace, control system and industrial automationAbstract
During the operation of the lead-zinc production while processing of polymetallic ores, problems arose related to the quality of products and the efficient use of equipment – agglomeration furnace and crushing apparatus. Previously, such issues were resolved due to the experiences and based on mathematical modeling of processes. The mathematical model for optimizing unnecessary such operating mode is a difficult program. Performing calculations is required a fairly large investment of time and resources. Therefore, the program of the mathematical model for optimizing the operating mode of the agglomeration furnace and the crushing device for sinter firing was replaced with a neural network by implementing the process of training the network based on the results of calculations on a mathematical model. The results obtained showed that neural network models were more accurate than mathematical models, which made it possible to solve production optimization problems of great complexity. The use of neural networks for modeling technological processes has made it possible to increase the efficiency of product quality control systems and automatic control systems for the roasting of sulfide polymetallic ores.
References
Abitova, G., Abdrakhmanova, E., Bekish, Z., Zadenova, T., Rzayeva, L., & Kulniyazova, K. (2021, April). Study and Simulation of Control System of the Process of Roasting in Fluidized Bed Furnaces of Polymetallic Sulfide Ores under Uncertainty. In 2021 IEEE International Conference on Smart Information Systems and Technologies (SIST) (pp. 1-6). IEEE.
Vekhnik, V.A. (2002). Thermal Neural Network Modeling Continuous Furnace Operation Metallurgical Heat Engineering. The Proceedings of the National Metallurgical Academy of Ukraine, 8, Publisher: NMetAU, Dnepropetrovsk, 226.
Andreeva, A.Yu., Romanchuk, V.A. (2015). The use of neurocomputer technologies in methods of managing complex objects. Modern technology and technology, 4 [Electronic resource]. URL: https://technology.snauka.ru/2015/04/6557 (date of access: 15.04.2021).
Srinivasan, D., Chang, C.S., & Liew, A.C. (1995). Demand forecasting using fuzzy neural computation, with special emphasis on weekend and public holiday forecasting. IEEE Transactions on Power Systems, 10(4), 1897-1903.
Santoso, N.I., & Tan, O.T. (1990). Neural-net based real-time control of capacitors installed on distribution systems. IEEE Transactions on Power Delivery, 5(1), 266-272.
Caudana, B., Conti, F., Helcke, G., & Pagani, R. (1995). A prototype expert system for large scale energy auditing in buildings. Pattern recognition, 28(10), 1467-1475.
Hiyama, T., Kouzuma, S., Imakubo, T., & Ortmeyer, T.H. (1995). Evaluation of neural network based real time maximum power tracking controller for PV system. IEEE transactions on Energy Conversion, 10(3), 543-548.
Thomas, R.J., Sakk, E., Hashemi, K., Ku, B.Y., & Chiang, H. (1990, May). On-line security classification using an artificial neural network. In IEEE International Symposium on Circuits and Systems (pp. 2921-2924). IEEE.
Aggoune, M.E., & Vadari, S.V. (1990, November). Use of artificial neural networks in a dispatcher training simulator for power system dynamic security assessment. In 1990 IEEE International Conference on Systems, Man, and Cybernetics Conference Proceedings (pp. 233-238). IEEE.
Michalik-Mielczarska, G. (1992). Dynamilc state estimation of a synchronous generator using neural-networks techniques, (92/15), 21-28.
Gorbunov, V.A. (2011). Using neural network technologies to improve energy efficiency heat technology installations. in Monograph, “Ivanovsky State Power Engineering University named after IN AND. Lenin”, Ivanovo, 476.
Tomashpolsky V.I. and other. (1992). Heat exchange and thermal modes in industrial furnaces, Minsk: Higher school, 217.
Sokolov, A.K. (2002). Optimization of operating and design parameters and improvement of calculation methods for gas heating furnaces”, in Diss.work, 340.
Yu, D., Utigard, T.A., & Barati, M. (2014). Fluidized bed selective oxidation-sulfation roasting of nickel sulfide concentrate: Part II. Sulfation roasting. Metallurgical and Materials Transactions B, 45(2), 662- 674.
Abitova, G. (2020). Mathematical simulation and study of control stability of the chemicalengineering processes in industry. Scientific Journal of Astana IT University, (4), 4-13.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish a manuscript in this journal agree to the following terms:
- The authors reserve the right to authorship of their work and transfer to the journal the right of first publication under the terms of the Creative Commons Attribution License, which allows others to freely distribute the published work with a mandatory link to the the original work and the first publication of the work in this journal.
- Authors have the right to conclude independent additional agreements that relate to the non-exclusive distribution of the work in the form in which it was published by this journal (for example, to post the work in the electronic repository of the institution or publish as part of a monograph), providing the link to the first publication of the work in this journal.
- Other terms stated in the Copyright Agreement.